Support

What's the ideal approach to maintaining a good battery-life-to battery-health ratio?

Really confused for these suggestions. A reply from a Professional said,most Battery Packs use the lithium-ion batteries cells, which are different from older, nickel-based batteries cells (which suffered from a nasty memory effect not present in lithium-ion batteries). Even though,if charging them incorrectly can decrease their lifespan. Most Lithium batteries should last you a few years, but improper care can decrease that lifespan, meaning that your battery will be unable to hold a charge-or unable to hold as big a charge as it used to-quicker. So, to clear things up, here's how to actually extend your battery's health a much as possible
  1. Recommend fully discharging your battery once a month to make sure this stays accurate.
  2. Keep it cool. Excess heat is not only bad for your processor,but your battery as well.
  3. Don't leave it fully charged. Similarly, lithium-ion batteries don't need to be charged all the way to 100%. In fact, they'd prefer not to be, so the 40%-80% rule you heard is a good guideline. If you need to charge it overnight, use the charger to stop it from charging after it's full.
  4. Perform shallow discharges. Discharges to 50% are better for your battery's long-term life than, say, small discharges to 90% or large discharges to 0% (since the 50% discharges provide the best number of cycles-to-usage ratio).
So,keep above things in mind and your battery will last longer.

Tips for extending the life of Battery Pack

Recently we heard so much negative reports about Battery Pack Explosion , though some of the accidents happened because some manufacturers produce and sell inferior products, but this is not the only reason. Sometimes the irrational use is also the main reason of these accidents. How can we avoid such accidents happened on ourselves? Firstly, you should choose a good quality Battery Pack, and then the next tips will help you away from the Battery Pack accident, and extend the life of your Battery Pack.

  1. You should understand the range of Battery Pack power input voltage, and make sure that charge your Battery Pack with the right input voltage. Each Battery Pack will sign its specification of input and output voltage on its packaging, if your Charging device output voltage is out of the scope of this ,then try not charging your Battery Pack with this Charging devices. To avoid this and to charge your Battery Pack accordingly, please chose RedPro Chargers RP-DC20 and RP-DC10 with appropriate Battery Plate that you will chose from the Plate Finder section on this web page..
  2. You should choose the right storage environment when you decide a longtime pause of using your Battery Pack. The best environment must be more cool and dry.
  3. You should use your Battery Pack frequently, and make sure that your Battery Pack charge and discharge cycling once a week at least.
  4. Though have the good external packaging, but the internal Printed Circuit Board Assembly and other components are still weakness, so be careful when you pick it up or take it down. More over Knocking the Battery Pack is forbidden.
  5. Don't put your Battery Pack close to the high temperature area.
  6. Don’t use potent chemical reagents to cleaning the Battery Pack.
Take these suggestions and get away off the inferior Battery Packs, then you won’t never met with ”mobile bombs.”.

Need Support for REDPRO Products mail us on Support Department support@red-pro.com



EXtended limited warranty

The +1 YEAR OF LIMITED WARRANTY option is valid only if it is activated within 12 month, from the date of the purchase the product.

PLATE FINDER

This Battery Plate is designed to use only with REDPRO Digital Dual Charger models RP-DC20 and RP-DC10. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC20 or RP-DC10 According to the model plate Digital Dual Charger automatically sets Charging Voltage and the Charging Current for the designed Battery Pack. That leaves no space for charging error!.

  • Search by Battery Model
  • Search by Video Camera
  • Search by Photo Camera

To find the appropriate plate for charging your Battery Pack.
Please choose from drop-down list, according to the Battery Pack you use.

Please select:

Manufacturer:
Battery Model:

To find the appropriate plate for charging your Battery Pack.
Please choose from drop-down list,a according to the Video Camcorder you use.

Please select:

Manufacturer:
Professional: Consumer:
Camera Model:

To find the appropriate plate for charging your Battery Pack.
Please choose from drop-down list, according to the Photo – DSLR Camera you use..

Please select:

Manufacturer:
Professional: Consumer:
Camera Model: