RP-DC50

Digital Dual Professional Battery Charger

The RP-DC50 Digital Dual Battery Charger Conveniently Charges Two Professional Batteries that provide simultaneously 14.4V DC Power out. Using the latest Battery Charging Technology with Zero-Volt Charging Activation, allows you to charge two Batteries at the same time, which saves you time and money....

The RP-DC50 Digital Dual Professional Battery Charger Conveniently Charges Two Professional Batteries Pack that run on 14.4V like RedPro RP-BPU80 or Sony BP-U Style Simultaneously, drawing power from either an AC wall source (an AC cord is included) or a 12/24V DC power source (a DC car charger need to be order separately). Additionally, the Dual Professional Battery Charger Features a USB Power Output to Charge other Devices with a USB Power Input, with powerful 2.1A Output. With protection against Overcharging, Overheating, and Short Circuit, the Duo Charger safely, conveniently, and quickly recharges up to two Professional Li-ion Batteries.

With two easily interchangeable Plates, the Intelligent Charger can be used for World Brand Battery Models, via the separate purchase of an additional Battery Plate that's Compatible with the Intended Battery Model.Dual Mod charging ( Manually selection on the switch button) provide possibility to have HIGH charging mode ( fully charge your battery for just 3 hours) or to use LOW charging mod with a detailed and optimal charging possibility for your Professional Battery. The Intelligent Charger Features and LCD Display that Graphically Shows Charge Status for both Batteries. With Protection against Overcharging, Overheating, and Short Circuit, the Duo Charger safely, conveniently, and quickly Recharges all Professional Li-Ion Batteries and one USB-Powered Device.

Large LCD Display Screen

A large LCD screen provides clear accurate and precise display of charging status, USB output, and DC 12V Input. Displaying L for LOW and H for HIGH Charging mod provides a clear insight into the way in which charging mode is used to charge your Professional Battery. With implemented back light, the readout function is enabled in the dark.

Implemented Backlight

With implemented backlight in the large LCD screen, the readout function is enabled in the dark, that give you clear possibility to use this charger at any place and any time.

Dual Bay Charging Option

The charger have possibility to charge one or two Batteries simultaneously in the same time. Intelligent Control MCU can automatically identify the voltage and number of Batteries that is put on the charger, going intelligent charge when being charging, and prevent overcharge, depending of the Charging Mode that is selected on the switch button.

Multiple Protection

The Circuit of the Battery Pack has Multiple Protection of Abnormal Current Protection, Voltage Protection, Short Circuit Protection and Overheating Temperature Protection. This functions allow the Battery Pack longer Operation life and safer use for Professional purposes.

Charging technologies

Intelligent Charging Systems integrate the Control Systems within the charger with the electronics within the Battery to allow much finer control over the charging process. As a safety precaution with high capacity Batteries a Pre-Charging stage is used. The charging cycle is initiated with a low current. If there is no corresponding rise in the Battery Voltage it indicates that there is possibly a Short Circuit in the Battery (zero volt activation). Constant Current / Constant Voltage (CC/CV) Charging Mode is a effective way to charge lithium Batteries. When a lithium Battery is nearly empty, we take constant current to charge it. Charger CPU automatically adjusts Charging Current to be lower than the max charging current that Battery can accepted. With constant charging, the voltage of Battery is slowly upping, when Battery volt reaches the max charging voltage, charger would make sure charging voltage fixed as "constant voltage" and reduce the charging current. When Battery is fully charged this state would be stopped..

POWERING ON AC ADAPTOR MODE WITH 12.5V 63W / 5A

To Power Professional Camcorder or any other unit with constant power of 12.5V and 63W max current, please use the appropriate Power Extension cable.

Charging Time:

Charging Time:Intelligent Control MCU can automatically identify the voltage and number of Batteries that is put on the charger, and prevent overcharge, depending of the Charging Mode that is selected on the switch button. In HIGH Charging mode one Professional Battery like RP-BPU80 with 74.88 Wh will be charged for approximate 3.5h, and if you take 2 of them on same charger the total charging time will be approximate 6.5h. In LOW Mode the charging time per one Battery will be 5.2h or per two 10.2h total charging time.

2X less.
Time to charge with one bay.
Time to charge with two bay

In Car Use

With 12V-24V DC power source (a DC 12V Car charger need to order separately) you can use charger and charge your batteries in the Car, Airplane, Bus or any other place where 12V-24V DC power is supplied.

Switch Button

Switch button provide LOW and HIGH Charging Mode. In High Mode Charger provide 1.5A current Power per one battery Slot or 0.8A per two Battery Slots. in LOW Charging Mode the current power is 1A per one slot and 0.5A per two slots. When HIGH Charging mode is active you can faster charge your battery pack but the battery life is shorter, while LOW mode extends the charging time but provides longer life of the battery.

Plate finder

This Battery Plate is designed to use only with REDPRO Digital Dual Charger model RP-DC50. This Economic Option allows you to Charge many different Batteries, all with one Charger model RP-DC50 According to the model plate Digital Dual Charger automatically sets Charging Voltage and the Charging Current for the designed Battery Pack. That leaves no space for charging error!.

TECH SPECPACKAGE INCLUDES